REAR COMBINATION LIGHT ASSEMBLY(w/ Rear No. 2 Seat) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click hereClick here

  2. REMOVE DECK BOARD ASSEMBLY

    Click hereClick here

  3. REMOVE DECK RAIL COVER (w/o Spare Tire)

    Click hereClick here

  4. REMOVE LUGGAGE COMPARTMENT TRAY (w/ Spare Tire)

    Click hereClick here

  5. REMOVE DECK FLOOR BOX LH

    Click hereClick here

  6. REMOVE DECK FLOOR BOX RH

    Click hereClick here

  7. REMOVE DECK TRIM SIDE BELT HOLE COVER LH

    Click hereClick here

  8. REMOVE DECK TRIM SIDE BELT HOLE COVER RH

    Click hereClick here

  9. REMOVE REAR NO. 2 SEAT TRACK BRACKET COVER

    Click here

  10. REMOVE REAR NO. 2 SEAT TRACK COVER

    Click here

  11. REMOVE REAR NO. 2 SEAT ASSEMBLY

    Click here

  12. REMOVE REAR DECK TRIM COVER

    Click hereClick here

  13. REMOVE REAR DOOR SCUFF PLATE LH

    Click hereClick here

  14. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click hereClick here

  15. REMOVE FRONT DECK SIDE TRIM COVER LH

    Click hereClick here

  16. REMOVE DECK TRIM SIDE SERVICE HOLE COVER

    Click hereClick here

  17. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click hereClick here

  18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click hereClick here

  19. REMOVE REAR COMBINATION LIGHT LENS AND BODY LH

    1. E184260

      Disconnect the connector.

    2. Remove the 3 nuts.

    3. Detach the clip and remove the rear combination light lens and body.