STEERING KNUCKLE INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL STEERING KNUCKLE LH

    1. Secure the steering knuckle in a vise.

      Note:

      When using a vise, do not overtighten it.

    2. Install the front axle hub sub-assembly LH and front brake dust cover with the 4 bolts.

      96 N*m

      979 kgf*cm

      71 ft.*lbf

      Note:

      Do not place the hub and bearing's magnet rotor side so that it is facing downward, and do not allow the magnet rotor side to become damaged or contact foreign matter.

  2. INSTALL FRONT LOWER BALL JOINT ASSEMBLY LH

    Click here

  3. INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH

    Click here