BRAKE CONTROL SYSTEM


  1. CONSTRUCTION


    1. The brake actuator consists of the actuator portion and skid control ECU.

    2. The actuator portion regulates the hydraulic brake pressure to each wheel cylinder.

      B00237BC01
      *a Skid Control ECU *b Actuator Portion

    3. The brake actuator is constructed with the following hydraulic circuit:

      B0023B5C01
      *1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
      *3 Master Cylinder Pressure Sensor *4 Master Cylinder Cut Solenoid Valve
      *5 Reservoir Cut Solenoid Valve *6 Pressure Holding Solenoid Valve
      *7 Pressure Reduction Solenoid Valve *8 Pump
      *9 Reservoir *10 Front Brake Caliper (Right Side)
      *11 Rear Brake Caliper (Left Side) *12 Rear Brake Caliper (Right Side)
      *13 Front Brake Caliper (Left Side) - -