CLUTCH SERVICE DATA
Clutch pedal stroke |
Standard |
144.0 to 164.0 mm (5.67 to 6.45 in.) |
Clutch pedal height from floor (for LHD) |
Standard |
154.3 to 168.3 mm (6.05 to 6.62 in.) |
Clutch pedal height from floor (for RHD) |
Standard |
162.7 to 178.7 mm (6.41 to 7.03 in.) |
Wear reserve stroke |
Standard |
28.0 to 48.0 mm (1.10 to 1.89 in.) |
Clutch release point from pedal full stroke end position |
1KR-FE |
20 mm (0.787 in.) or more |
Clutch disc rivet head depth |
Minimum |
0.3 mm (0.0118 in.) |
Clutch disc runout |
Maximum |
0.8 mm (0.0315 in.) |
Diaphragm spring wear |
Maximum depth Maximum width |
0.5 mm (0.0197 in.) 6.0 mm (0.236 in.) |
Flywheel sub-assembly runout |
Maximum |
0.1 mm (0.00394 in.) |
Diaphragm spring tip alignment |
Maximum |
0.5 mm (0.0197 in.) |
Clutch pedal switch assembly resistance |
ON (pushed) OFF (free) |
Below 1 Ω 10 kΩ or higher |
Clutch switch clearance (for LHD) (for No. 2 Clutch Pedal Switch Assembly) |
Standard |
1.7 to 4.7 mm (0.0670 to 0.184 in.) |
Clutch switch clearance (for RHD) (for No. 2 Clutch Pedal Switch Assembly) |
Standard |
1.1 to 4.1 mm (0.0434 to 0.161 in.) |
Clutch switch clearance (w/ Clutch Pedal Switch Assembly) |
Standard |
2.2 to 5.2 mm (0.0867 to 0.204 in.) |
SAE J1703 or FMVSS No. 116 DOT3 |
SAE J1704 or FMVSS No. 116 DOT4 |