HEADUP DISPLAY SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE INTEGRATION CONTROL AND PANEL

    Click here

  9. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL

    Click here

  10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  11. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  12. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  13. REMOVE HEADUP DISPLAY SWITCH ASSEMBLY


    1. A005ETH

      Disengage the 4 claws and remove the headup display switch assembly.