LUGGAGE COMPARTMENT DOOR LOCK INSPECTION

PROCEDURE

1. INSPECT LUGGAGE DOOR CLOSER ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Luggage Door Closer Assembly)
      *b	Lock
      *c	Open

      Check the operation of the door lock motor.

      
      

      1. Move the door lock to the closed (lock) position.

      2. Apply battery voltage to the door lock motor and check the operation of the door lock motor.

         OK
         Measurement Condition Specified Condition Battery positive (+) → 1 (B) Battery negative (-) → 2 (E) Luggage compartment door lock motor open (unlock) operation

         If the result is not as specified, replace the luggage door closer assembly.

   2. Check the operation of the door courtesy switch.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 2 (E) - 3 (D+) Locked 10 kΩ or higher 2 (E) - 3 (D+) Unlocked Below 1 Ω

         If the result is not as specified, replace the luggage door closer assembly.