DIFFERENTIAL PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL DIFFERENTIAL PRESSURE SENSOR

   
   

   1. Install the differential pressure sensor to the inlet No. 1 air duct sub-assembly with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   2. Connect the vacuum transmitting hose to the differential pressure sensor and slide the clip to secure it.

   3. Connect the differential pressure sensor connector.

2. LEARNING DIFFERENTIAL PRESSURE SENSOR

   
   

   1. Start the engine and allow it to idle until the engine coolant temperature reaches 75°C (167°F) or higher (A).

   2. Turn the engine switch off and wait for 30 seconds or more (B).

   3. Repeat the above procedures (A) and (B) 3 times.

      Tech Tips

      Procedures (A) and (B) must be repeated 3 times to complete the differential pressure sensor learning process.