DIFFERENTIAL MOUNT CUSHION(for Rear) REMOVAL

PROCEDURE


  1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  2. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. A01HG1RN02

      Install SST as shown in the illustration.

      SST
      09316-12010
      09570-24011

    2. Insert the SST bolt at the location shown in the illustration and remove the rear No. 1 differential mount cushion from the rear suspension member sub-assembly.

      SST
      09316-12010
      09570-24011
      A01HDRWC02
      *1 Rear Suspension Member Sub-assembly - -
      *a Turn *b Hold
      B008IUL Turning Direction B008H52 Front of Vehicle
      B008HTY SST Bolt Position - -

      Note


      • When removing the rear No. 1 differential mount cushion, do not contact the rear suspension member sub-assembly with SST (09316-12010).

      • Before using SST, apply grease to SST bolt.

      • Set SST in the correct direction.

      • Make sure SST contacts the entire seat surface of the rear No. 1 differential mount cushion.

      • Make sure to install SST with the SST bolt straight.