CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL CRANKSHAFT POSITION SENSOR

    1. A157503C07

      *1

      O-ring

      Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

    2. Install the crankshaft position sensor with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      • When reusing the crankshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed during installation.

    3. Connect the crankshaft position sensor connector.

  2. INSTALL REAR ENGINE UNDER COVER RH

    Click here