POWER WINDOW CONTROL SYSTEM FAIL-SAFE CHART
POWER WINDOW OPERATION IN FAIL-SAFE MODE
Tip:If the pulse sensor built into the door window regulator malfunctions, the power window control system enters fail-safe mode.
The pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.
Tip:The power window control system prohibits the following power window operations when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.
Table 1. Power Window Regulator Master Switch Power Window Operation
Condition
Ignition Switch ON
Ignition Switch off
(Key-off Operation Permitted)
Ignition Switch off
(Key-off Operation Prohibited)
Manual up
X
X
-
Manual down
○
X
-
Manual up
(Hold switch at auto up position)
○*
X
-
Auto up
X
X
-
Auto down
X
X
-
*: In manual mode and jam protection not operative
Tip:○: Operative
X: Operation prohibited
Table 2. Power Window Regulator Switch (for Front Passenger Side, Rear LH*1 and Rear RH*1) Power Window Operation
Condition
Ignition Switch ON
Ignition Switch off
(Key-off Operation Permitted)
Ignition Switch off
(Key-off Operation Prohibited)
Manual up
X
X
-
Manual down
○
X
-
Manual up
(Hold switch at auto up position)
○*2
X
-
Auto up
X
X
-
Auto down
X
X
-
Manual up (Remote switch operation)
X
X
-
Manual down (Remote switch operation)
X
X
-
Auto up (Remote switch operation)
(Hold switch at auto up position)
X
X
-
Auto up (Remote switch operation)
X
X
-
Auto down (Remote switch operation)
X
X
-
*1: w/ Rear Door Power Window
*2: In manual mode and jam protection not operative
Tip:○: Operative
X: Operation prohibited
Fail-safe Deactivation Condition
When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the window from the fully open position. As a result, fail-safe mode is deactivated and power window operation returns to normal.
Initialization failure
Tip:During initialization of the power window ECU, when the window position or initialization complete status cannot be properly read from the EEPROM, the power window control system prohibits the following operations.
Table 3. Power Window Regulator Master Switch Power Window Operation
Condition
Ignition Switch ON
Ignition Switch off
(Key-off Operation Permitted)
Ignition Switch off
(Key-off Operation Prohibited)
Manual up
X
X
-
Manual down
○
X
-
Manual up
(Hold switch at auto up position)
○*
X
-
Auto up
X
X
-
Auto down
X
X
-
*: In manual mode and jam protection not operative
Tip:○: Operative
X: Operation prohibited
Table 4. Power Window Regulator Switch (for Front Passenger Side, Rear LH*1 and Rear RH*1) Power Window Operation
Condition
Ignition Switch ON
Ignition Switch off
(Key-off Operation Permitted)
Ignition Switch off
(Key-off Operation Prohibited)
Manual up
X
X
-
Manual down
○
X
-
Manual up
(Hold switch at auto up position)
○*2
X
-
Auto up
X
X
-
Auto down
X
X
-
Manual up (Remote switch operation)
X
X
-
Manual down (Remote switch operation)
X
X
-
Auto up (Remote switch operation)
(Hold switch at auto up position)
X
X
-
Auto up (Remote switch operation)
X
X
-
Auto down (Remote switch operation)
X
X
-
*1: w/ Rear Door Power Window
*2: In manual mode and jam protection not operative
Tip:○: Operative
X: Operation prohibited
LIN communication failure
Tip:If the LIN communication line malfunctions (communication stop), the power window control system prohibits the following operations.
Table 5. Power Window Regulator Master Switch Power Window Operation
Ignition Switch ON
Manual up
○*
Manual down
○
Manual up (Hold switch at auto up position)
X
Auto up
X
Auto down
X
*: Jam protection operative
Tip:○: Operative
X: Operation prohibited
Remote up/down function does not operate.
Table 6. Power Window Regulator Switch (for Front Passenger Side, Rear LH*1 and Rear RH*1) Power Window Operation
Ignition Switch ON
Manual up
○*2
Manual down
○
Manual up (Hold switch at auto up position)
X
Auto up
X
Auto down
X
*1: w/ Rear Door Power Window
*2: Jam protection operative
Tip:○: Operative
X: Operation prohibited
LIN communication failure and pulse sensor failure
Tip:If the LIN communication line malfunctions (communication stop) and the pulse sensor for the jam protection function has problems, the power window control system prohibits the following operations.
Table 7. Power Window Regulator Master Switch Power Window Operation
Always
Manual up
X
Manual down
X
Manual up (Hold switch at auto up position)
X
Auto up
X
Auto down
X
Tip:X: Operation prohibited
Driver side door window: When there is no jam protection control due to a LIN communication failure, the manual up and auto up functions do not operate.
Remote switch operation: Not operative during LIN communication failure.
Table 8. Power Window Regulator Switch (for Front Passenger Side, Rear LH* and Rear RH*) Power Window Operation
Always
Manual up
X
Manual down
X
Manual up (Hold switch at auto up position)
X
Auto up
X
Auto down
X
*: w/ Rear Door Power Window
Tip:X: Operation prohibited
LIN communication failure and displacement of non-detection range in direction window opens or initialization failure
Tip:If the LIN communication line malfunctions (communication stop) and the window position or the learned value is abnormal, the power window control system prohibits the following operations.
Table 9. Power Window Regulator Master Switch Power Window Operation
Always*1
Always*2
Manual up
○*3
○*3
Manual down
○
○
Manual up (Hold switch at auto up position)
-
○*3
Auto up
-
X
Auto down
-
X
*1: w/ Rear door power window
*2: w/o Rear door power window
*3: Jam protection operative and window reverses direction upon reaching the fully closed position
Tip:○: Operative
X: Operation prohibited
Remote switch operation: Operation is not possible during a LIN communication failure.
Table 10. Power Window Regulator Switch (for Front Passenger Side, Rear LH*1 and Rear RH*1) Power Window Operation
Always
Manual up
○*2
Manual down
○
Manual up (Hold switch at auto up position)
○*2
Auto up
X
Auto down
X
*1: w/ Rear Door Power Window
*2: Jam protection operative and window reverses direction upon reaching the fully closed position
Tip:○: Operative
X: Operation prohibited