FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE

1. REMOVE REAR NO. 2 SEAT ASSEMBLY

   Click here

2. REMOVE BACK DOOR SCUFF PLATE

   Click here

3. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

5. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

7. REMOVE LAP BELT OUTER ANCHOR COVER

   Click here

8. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

   Click here

9. REMOVE CENTER PILLAR LOWER GARNISH LH

   Click here

10. REMOVE NO. 1 DECK TRIM COVER

    Click here

11. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

12. REMOVE FRONT DECK SIDE TRIM COVER LH

    Click here

13. REMOVE NO. 2 CUP HOLDER

    Click here

14. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

15. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    Click here

16. REMOVE NO. 2 ROOM LIGHT ASSEMBLY

    Click here

17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

18. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    
    

    1. 

       Remove the screw.

    2. Disengage the guide to disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.

    3. 

       Disconnect the fuel lid lock control cable sub-assembly and remove fuel lid lock open lever sub-assembly.

19. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

    
    

    1. 

       Disengage the 2 claws and disconnect the fuel lid lock control cable sub-assembly.

    2. Disengage the 8 clamps and remove the fuel lid lock control cable sub-assembly.