CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. B007YSI

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If the camshaft position sensor has been struck or dropped, replace it.

  3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)


    1. B007ZAR

      Disconnect the fuel pump assembly connector.

    2. B007Z6W

      Disconnect the camshaft position sensor connector.

    3. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If the camshaft position sensor has been struck or dropped, replace it.