DRIVE BELT REMOVAL

PROCEDURE

  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  2. REMOVE REAR ENGINE UNDER COVER RH

    1. A292527

      Remove the 4 clips and rear engine under cover RH.

  3. REMOVE V-RIBBED BELT

    1. A313142C02

      *a

      5 mm Bi-hexagon Wrench

      *b

      Hole

      *c

      Gap

      Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration.

    2. Rotate the V-ribbed belt tensioner assembly clockwise to align the hole with the gap, and then insert a 5 mm bi-hexagon wrench into the hole and gap to secure the V-ribbed belt tensioner assembly.

    3. Remove the V-ribbed belt from the V-ribbed belt tensioner assembly.