HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for Double Wishbone Type Suspension)

    1. Install the rear height control sensor sub-assembly with the 2 bolts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

    2. Engage the clamp.

    3. Connect the connector.

  2. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for Torsion Beam Type Suspension)

    1. Engage the 2 guides.

    2. Install the rear height control sensor sub-assembly with the 3 bolts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

    3. Connect the connector.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  4. PERFORM INITIALIZATION

    for Sedan:Click here

    for Hatchback, Wagon:Click here

  5. ADJUST HEADLIGHT AIMING

    for Sedan:Click here

    for Hatchback, Wagon:Click here