REAR SEAT ASSEMBLY(for LH Side) REMOVAL

PROCEDURE

  1. REMOVE REAR SEAT NO. 3 LEG SIDE COVER

    B336596

    1. Using a screwdriver, detach the 4 claws.

      Tip:

      Tape the screwdriver tip before use.

    2. Detach the 2 guides and remove the rear seat No. 3 leg side cover in the direction shown by the arrow in the illustration.

  2. REMOVE REAR SEAT FRONT BRACKET COVER LH

    1. B336598

      Using a screwdriver, detach the 4 claws to remove the rear seat front bracket cover LH.

      Tip:

      Tape the screwdriver tip before use.

  3. REMOVE REAR SEAT ASSEMBLY LH

    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. B336602

      Remove the 2 bolts on the front side of the seat.

    3. Lift up the seat track adjusting handle and move the seat to the foremost position.

    4. B336605

      w/ Seat Belt Warning System:

      Remove the connector.

    5. Remove the 3 bolts on the rear side of the seat.

    6. Fully tilt the seatback forward. Then remove the rear seat assembly LH.

      Note:

      Be careful not to damage the vehicle body.

  4. REMOVE SEAT LEG BRACKET

    B336604

    1. Detach the clamp and remove the 4 bolts.

    2. Detach the guide to remove the seat leg bracket.