CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      B004EYFC01
      *a

      Component without harness connected

      (Cruise Control Switch)

      		 - -
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (ECC) - 3 (CCS) Cruise control switch (ON/OFF button) released 1 MΩ or higher
      Cruise control switch (ON/OFF button) pushed Below 2.5 Ω
      +RES 235 to 245 Ω
      -SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω

      If the result is not as specified, replace the cruise control main switch.