METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE METER / GAUGE SYSTEM

    1. Customizing with the GTS

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note:

        Record the current settings before customizing.

        Warning

        Tester Display

        Description

        Default

        Setting

        ECU

        Lane Change Flashing Times Setting

        Function to change the lane change flashing times

        3

        00:OFF,01:3,10:5,11:7

        Combination meter assembly

        Flasher Sound Tone Setting

        Function to change the flasher sound tone

        Tone 1

        00:Tone 1,01:Tone 2,10:Tone 3

        Combination meter assembly

        Display

        Tester Display

        Description

        Default

        Setting

        ECU

        ODO Display Time After IG OFF Setting

        Function to change the ODO display time after the ignition switch is turned off

        30s

        00:30s,01:60s,10:600s,11:OFF

        Combination meter assembly