ECD SYSTEM(w/o Glow Plug Controller), Diagnostic DTC:P0600,P0604,P0605,P0606,P0607,P060A,P060B,P060D,P0611,P061A,P061B,P061C and P062F

DTC Code DTC Name
P0600 Serial Communication Link
P0604 Random Access Memory (RAM)
P0605 Internal Control Module Read Only Memory (ROM) Error
P0606 ECM / PCM Processor
P0607 Control Module Performance
P060A Internal Control Module Monitoring Processor Performance
P060B Internal Control Module A/D Processing Performance
P060D Internal Control Module Accelerator Pedal Position Performance
P0611 Fuel Injector Control Module Performance
P061A Internal Control Module Torque Performance
P061B Internal Control Module Torque Calculation Performance
P061C Internal Control Module Engine RPM Performance
P062F Internal Control Module EEPROM Error

DESCRIPTION

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

Memory

P0600

Serial Communication Link

ECM internal error

(1 or 2 trip detection logic)

  • ECM

Comes on

DTC stored

P0604

Random Access Memory (RAM)

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P0605

Internal Control Module Read Only Memory (ROM) Error

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P0606

ECM / PCM Processor

ECM internal error

(1 or 2 trip detection logic)

  • ECM

Comes on

DTC stored

P0607

Control Module Performance

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P060A

Internal Control Module Monitoring Processor Performance

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P060B

Internal Control Module A/D Processing Performance

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P060D

Internal Control Module Accelerator Pedal Position Performance

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P0611

Fuel Injector Control Module Performance

ECM internal error

(1 or 2 trip detection logic)

  • ECM

Comes on

DTC stored

P061A

Internal Control Module Torque Performance

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P061B

Internal Control Module Torque Calculation Performance

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P061C

Internal Control Module Engine RPM Performance

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored

P062F

Internal Control Module EEPROM Error

ECM internal error

(1 trip detection logic)

  • ECM

Comes on

DTC stored
Table 1. DTC Detection Drive Pattern

DTC No.

DTC Detection Drive Pattern

P0600

One of following conditions is met:

  • Ignition switch ON

  • Engine idling

  • Vehicle being driven in a stop-and-go city drive pattern for more than 15 minutes.

P0604

P0605

P0606

P0607

P060A

P060B

P060D

P0611

P061A

P061B

P061C

P062F

CAUTION / NOTICE / HINT

Note:

When replacing the ECM, perform ECM Initialization and Registration.

Click hereClick here

Tip:

  • When the ECM must be replaced, before replacing the ECM, perform the "Learning Values Save" function using the GTS. Then after installing a new ECM, perform all of the initialization and registration procedures for the "Learning Values Write" function by following the instructions shown on the GTS display.

  • Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.

PROCEDURE

  1. REPLACE ECM

    1. Replace the ECM.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  2. CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

    3. Clear the DTCs.

      Powertrain > Engine and ECT > Clear DTCs

    4. Turn the ignition switch off and wait for 30 seconds or more.

    5. Turn the ignition switch to ON.

    6. Start the engine.

    7. Drive the vehicle with a stop-and-go city drive pattern for more than 15 minutes.

      CAUTION:

      When performing the confirmation driving pattern, obey all speed limits and traffic laws.

    8. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

    9. Confirm that the DTC is not output again.

      Powertrain > Engine and ECT > Trouble Codes

    Result

    Proceed to

    NEXT
    NEXT

    END