FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Engage the 8 clamps.

    2. A005DUS

      Engage the 2 claws to connect the fuel lid lock control cable sub-assembly.

  2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. Connect the fuel lid lock control cable sub-assembly.

    2. A005F4M

      Engage the guide and install the fuel lid lock open lever sub-assembly as shown in the illustration.

    3. Install the screw.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. INSTALL NO. 2 ROOM LIGHT ASSEMBLY

    Click here

  5. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    Click here

  6. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

  7. INSTALL NO. 2 CUP HOLDER

    Click here

  8. INSTALL FRONT DECK SIDE TRIM COVER LH

    Click here

  9. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  10. INSTALL NO. 1 DECK TRIM COVER

    Click here

  11. INSTALL CENTER PILLAR LOWER GARNISH LH

    Click here

  12. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

  13. INSTALL LAP BELT OUTER ANCHOR COVER

    Click here

  14. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  15. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  16. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  17. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  18. INSTALL BACK DOOR SCUFF PLATE

    Click here

  19. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here