FRONT SEAT OUTER BELT ASSEMBLY (for Power Seat) INSTALLATION


  1. INSTALL SHOULDER BELT ANCHORAGE PLATE COVER

    A01E1PJE03

    1. Install the plate cover as shown in the illustration.

      Tech Tips

      Make sure the plate cover is firmly set into the garnish's claws.

  2. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

    A01E0Q6E01

    1. Insert the tip of the adjuster to the pillar, and align the adjuster's bolt hole to the pillar's bolt hole.

    2. Install the bolt as shown in the illustration.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  3. INSTALL CENTER PILLAR GARNISH LH


    1. Attach the guide and clip to install the center pillar garnish.

    2. Connect the front seat belt shoulder anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    3. Attach the 4 claws to install the front seat belt shoulder anchor cover.

  4. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH

    Note

    Do not disassemble the retractor.


    1. A01DWQOE03

      w/o Pretensioner:

      Align the claws with the seat belt positioning holes and install the ELR of the seat belt with the bolt as shown in the illustration.

      Torque:
      4.8 N*m  { 49 kgf*cm, 42 in.*lbf }
    2. A01DWBEE01

      w/ Pretensioner:

      Install the bolt and seat belt.

      Torque:
      4.8 N*m  { 49 kgf*cm, 42 in.*lbf }
    3. A01E1QQ

      w/ Pretensioner:

      Connect the pretensioner connector as shown in the illustration.

    4. A01DUXKE02

      Extra cab and double cab:

      Install the anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A01DVKRE02

      Double cab:

      Install the anchor of the seat belt with the built-in bolt after installing the center pillar garnish lower.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL