PARKING LOCK RELEASE CABLE REMOVAL

PROCEDURE


  1. AIR SUSPENSION CONTROL PROHIBITED (w/ Air Suspension)

    Click here

  2. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

    Click here

  3. REMOVE NO. 1 CENTER FLOOR HEAT INSULATOR SUB-ASSEMBLY

    Click here

  4. REMOVE THROTTLE LINK CONNECTING ROD ASSEMBLY


    1. B006ATMC01
      B006AHR Bolt
      B006EC9 Nut and Spring Washer

      Remove the nut, spring washer and 2 bolts and disconnect the throttle link connecting rod assembly from the shift control actuator assembly.

    2. B006EEHC01
      *1 Cover
      B006DHE Disconnect

      Detach the 2 claws and disconnect the cover from the throttle link connecting rod assembly as shown in the illustration.

    3. B006A7HC01
      *1 Parking Lock Release Lever Assembly Cable End
      *2 Throttle Link Connecting Rod Assembly Cable End

      Disconnect the parking lock release lever assembly cable end from the throttle link connecting rod assembly cable end.

    4. B006ENT

      Remove the 2 bolts and throttle link connecting rod assembly from the No. 2 parking release cable bracket sub-assembly.

  5. REMOVE TRANSMISSION LEVER OUTER


    1. B006CV7

      Remove the nut, spring washer and transmission lever outer from the throttle link connecting rod assembly.

  6. REMOVE PARKING LOCK RELEASE LEVER ASSEMBLY


    1. B006GXG

      Remove the nut and No. 1 parking lock release cable clamp bracket from the body.

    2. B006FQ1C01
      *a Protector

      Remove the No. 1 parking lock release cable clamp bracket from the parking lock release lever assembly protector.

    3. B006GC3C01
      *A for LHD
      *B for RHD

      Remove the 4 bolts and pull out the parking lock release lever assembly from the floor panel through holes to remove it.

      Tech Tips


      • Do not damage the cable with the floor panel through holes.

      • Do not bend the cable.

  7. REMOVE NO. 2 PARKING RELEASE CABLE BRACKET SUB-ASSEMBLY

    Tech Tips

    Perform this procedure only when replacing the No. 2 parking release cable bracket sub-assembly.


    1. B006CSM

      Remove the 2 bolts and No. 2 parking release cable bracket sub-assembly from the engine rear mounting member.