AIR CONDITIONING SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE AIR CONDITIONING SYSTEM

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    1. Customizing with the intelligent tester

      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Utility / Customize / Air Conditioner.

      5. Select the setting by referring to the table below.

        Air Conditioner

        Tester Display

        Description

        Default

        Setting

        ECU

        Set Temperature Shift

        Function to set the temperature shift.

        Normal

        00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C

        Air conditioning amplifier assembly

        Compressor Mode

        Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off.

        Automatic

        0:Automatic,1:Manual

        Air conditioning amplifier assembly

        Air Inlet Mode

        Function to automatically change to recirculation mode when the A/C is turned on.

        Automatic

        0:Automatic,1:Manual

        Air conditioning amplifier assembly

        Foot/DEF Auto Mode

        Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on.

        ON

        0:ON,1:OFF

        Air conditioning amplifier assembly

        Foot/DEF Automatic Blow Up Function

        Function to change the blower level automatically when the front defroster is on.

        ON

        0:ON,1:OFF

        Air conditioning amplifier assembly

        Button Press Buzzer

        Function to sound a buzzer when a button is pressed.

        ON

        0:ON,1:OFF

        Air conditioning amplifier assembly*

        Emission Gas Sensor Shift

        Function to change the sensitivity of the exhaust gas sensor.

        Normal

        0000001:Much Less,0000010:Less,0000100:Little Less,0001000:Normal,0010000:Little More,0100000:More,1000000:Much More

        Air conditioning amplifier assembly

        Add Foot Air in FACE Mode

        When the FACE mode is selected, an additional amount of air is blown to the foot area.

        ON

        0:ON,1:OFF

        Air conditioning amplifier assembly
        Tip:

        *: This item is displayed even if the vehicle is not equipped with a navigation assembly. Even if the setting is changed, nothing happens because the vehicle does not have the buzzer sounding function.