FRONT DRIVE SHAFT ASSEMBLY(for 1PP) INSPECTION

PROCEDURE

  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

    1. N000191

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. C304794N01

      Check whether each drive shaft dimension (A) is within specification.

      Note:

      Keep the drive shaft assembly level during inspection.

      Dimension (A)

      for LH Side

      549.8 mm (1.80 ft.)

      for RH Side

      642.0 mm (2.11 ft.)