DRIVE BELT ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT V-RIBBED BELT

    1. A122920

      Check the belt for wear, cracks or other signs of damage.

      If any of the following defects is found, replace the V-ribbed belt.

      • The belt is cracked.

      • The belt is worn out to the extent that the cords are exposed.

      • The belt has chunks missing from the ribs.

    2. A141644C03

      *a

      CORRECT

      *b

      INCORRECT

      Check that the belt fits properly in the ribbed grooves.

      Tip:

      Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.

  2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

    1. Remove the V-ribbed belt.

      Click here

    2. Check that nothing is caught in the V-ribbed belt tensioner assembly by turning it clockwise and counterclockwise.

      Tip:

      If a malfunction exists, replace the V-ribbed belt tensioner assembly.

    3. Install the V-ribbed belt.

      Click here