MULTI-MODE MANUAL TRANSAXLE ECU(for LHD) REMOVAL

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click here

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. REMOVE ECU INTEGRATION BOX RH

    1. Disconnect each connector.

    2. C275001

      Remove the 3 bolts and ECU integration box RH.

  5. REMOVE TCM

    1. C275002

      Remove the TCM from the ECU integration box RH.