SHIFT LEVER REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   
   

   • If the shift lock control unit assembly is to be replaced with a new one, it is necessary to clear the learned shift sensor voltage values by disconnecting and reconnecting the cable of the negative (-) auxiliary battery terminal.

   • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

2. REMOVE DECK BOARD ASSEMBLY

   Click here

3. REMOVE NO. 1 DECK BOARD

   Click here

4. REMOVE NO. 2 DECK BOARD

   Click here

5. REMOVE REAR DECK FLOOR BOX

   Click here

6. REMOVE DECK FLOOR BOX RH

   Click here

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

8. REMOVE SHIFT LEVER KNOB

   
   

   1. 

      Apply protective tape around the shift lock control unit assembly.

      Note

      As adhesive residue may fall when removing the shift lever knob, apply protective tape.

   2. 

      Turn the shift lever knob in the direction of the arrow in the illustration to remove it.

9. REMOVE INTEGRATION CONTROL AND PANEL

   Click here

10. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL

    Click here

11. REMOVE CONSOLE BOX ASSEMBLY

    Click here

12. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

13. REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY

    
    

    1. 

       Remove the 3 nuts and separate the shift lock control unit assembly.

    2. 

       Disconnect the 3 connectors and remove the shift lock control unit assembly.