DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   
   

   1. Engage the guide and install the door control receiver.

   2. Install the bolt.

      Torque:

      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

   3. Connect the connector.

      Note

      
      

      • Do not drop the door control receiver or apply impact on it.

      • When replacing or inspecting the door control receiver, do not change the wiring route or the length of the harness around the receiver.

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

   
   

   1. Engage the 4 clips and install the package tray trim panel assembly with the center stop light assembly.

   2. Install the 4 clips.

   3. Connect the connector.

3. INSTALL REAR WINDOW SIDE GARNISH LH

   Click here

4. INSTALL REAR WINDOW SIDE GARNISH RH

   Tech Tips

   Use the same procedure described for the LH side.

5. INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH

   Click here

6. INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

7. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

8. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

   Tech Tips

   Use the same procedure described for the LH side.

9. CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER LH

   Click here

10. CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

11. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

12. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

15. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH

    Click here

16. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

    Click here