PRE-CRASH SAFETY SYSTEM DIAGNOSIS SYSTEM

  1. CHECK DLC3

    1. Check the DLC3.

      Click here

  2. FUNCTION OF WARNING INDICATOR AND MESSAGE

    1. If the pre-crash safety system is not functioning properly, the driver is warned by the PCS warning light and a warning message on the multi-information display in the combination meter assembly.

      Master Warning Indicator

      Warning Message

      Detail

      DTC

      PCS warning light

      Illuminated

      Pre-crash safety Malfunction Visit Your Dealer

      Pre-crash safety system is malfunctioning

      Stored

      Blinks

      Not illuminated

      Pre-crash safety Unavailable

      Millimeter wave radar sensor assembly misaligned

      Not stored

      Blinks

      Not illuminated

      Pre-crash safety Unavailable Clean Radar

      Foreign matter attached to millimeter wave radar sensor assembly

      Not stored

      Blinks

      Not illuminated

      Front Camera Systems Unavailable Clean Windshield

      Foreign matter attached to forward recognition camera or area of windshield in front of forward recognition camera

      Not stored

      Blinks

      Not illuminated

      Pre-crash safety Unavailable Wait a Moment

      • Millimeter wave radar sensor assembly temperature malfunction

      • Millimeter wave radar sensor assembly low voltage malfunction

      Not stored

      Blinks

      Not illuminated

      Front Camera Systems Unavailable

      • Forward recognition camera temperature outside of operational range

      • Abnormal forward recognition camera voltage

      • Other forward recognition camera malfunction

      Not stored

      Blinks

      Not illuminated

      VSC Turned Off Pre-crash safety Unavailable

      VSC is disabled

      Not stored

      Illuminates

  3. Initial check

    1. The initial check occurs when the power switch is off for more than 2 seconds, and then turned to ON. The initial check consists of a pre-crash safety system diagnostic check with a duration of approximately 3 seconds.

    2. If a malfunction is detected during the initial check, the multi-information display will display "Pre-crash safety Malfunction Visit Your Dealer" or "Pre-crash safety Unavailable".

  4. Constant check

    1. The driving support ECU assembly constantly monitors the pre-crash safety system for malfunctions after the power switch is turned on (IG) and the initial check (approximately 3 seconds) has completed.

    2. "Pre-crash safety Malfunction Visit Your Dealer" or "Pre-crash safety Unavailable" is displayed on the multi-information display in the combination meter assembly when the constant check detects malfunctions in the pre-crash safety system.