LOWER INSTRUMENT PANEL DISASSEMBLY

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

    1. B337833

      Detach the clip and remove the glove compartment door stopper sub-assembly.

  2. REMOVE NO. 2 SWITCH HOLE BASE

    1. B337834

      Detach the 3 clips and claw and remove the No. 2 switch hole base.

  3. REMOVE SPARE SWITCH HOLE COVER

    1. B337835

      except 4WD/AWD:

      Detach the 2 claws and remove the spare switch hole cover.

    2. B337836

      w/o Power Back Door:

      Detach the 2 claws and remove the spare switch hole cover.

    3. B337837

      w/o Downhill Assist Control:

      Detach the 2 claws and remove the spare switch hole cover.

    4. B337838

      w/o Power Back Door:

      Detach the 2 claws and remove the spare switch hole cover.

  4. REMOVE DIFFERENTIAL LOCK SWITCH (for 4WD/AWD)

    Click here

  5. REMOVE DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)

    for LHD:

    Click here

    for RHD:

    Click here

  6. REMOVE DOWNHILL ASSIST CONTROL SWITCH (w/ Downhill Assist Control)

    Click here

  7. REMOVE POWER BACK DOOR MAIN SWITCH (w/ Power Back Door)

    Click here

  8. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Entry and Start System)

    Click here

  9. REMOVE PUSH START SWITCH (for RHD with Entry and Start System)

    Click here

  10. REMOVE ANTENNA CORD SUB-ASSEMBLY

    for LHD:

    Click here

    for RHD:

    Click here