ELECTRONIC SHIFT LEVER SYSTEM FAIL-SAFE CHART

If the transmission control ECU assembly detects a malfunction, the fail-safe functions shown in the table below are activated.

DTC No. Fail-safe Function Problem Symptoms

C2300

C2301

In order to release park (P), the shift control actuator assembly is operated.

(Depending on the cause of the malfunction, park (P) cannot be released.)

Either of the following may occur:


  • The shift state (P) is not indicated correctly on the meter.

  • Although the shift state is indicated on the combination meter, the vehicle cannot be driven.
C2303 - The auxiliary battery is discharged.

C2304

C2305

C2306

 The P CON MTR relay (transaxle parking lock control relay) is turned off. The parking lock mechanism cannot be switched.
C2307 The P CON MTR relay (transaxle parking lock control relay) is turned off.

Either of the following may occur:


  • The shift state (P) is not indicated correctly on the meter.

  • Although the shift state is indicated on the combination meter, the vehicle cannot be driven.
C2308 -

Either of the following may occur:


  • The parking lock mechanism cannot be switched.

  • The key reminder buzzer sounds constantly.
C2309 The P CON MTR relay (transaxle parking lock control relay) is turned off. The parking lock mechanism cannot be switched.
C2311 - The parking lock mechanism cannot be switched.