FRONT POWER SEAT MOTOR ASSEMBLY (for Reclining) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for RHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.


  1. INSTALL POWER SEAT MOTOR ASSEMBLY (for Reclining, w/o Front Seat Side Airbag)


    1. A01E0EP

      Temporarily install the power seat motor assembly (for Reclining) with the 3 bolts.

    2. A01E2BP

      Install the reclining rod.

    3. Attach the 6 claws to install the push nut to the reclining rod.

    4. Using a 4 mm socket hexagon wrench, tighten the 3 bolts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

    5. Attach the 8 hooks to install the seatback spring.

    6. Connect the connector.

  2. INSTALL NO. 1 SEAT WIRE (w/ Front Seat Side Airbag)


    1. A01DWPP

      Attach the 2 wire harness clamps to install the No. 1 seat wire.

    2. w/ Front Seat Side Airbag:

      Connect the front power seat motor assembly (for Reclining) connector.

  3. INSTALL RECLINING ADJUSTER INSIDE COVER LH (w/ Front Seat Side Airbag)


    1. Attach the claw to install the reclining adjuster inside cover LH.

    2. Install the screw.

  4. INSTALL RECLINING ADJUSTER INSIDE COVER RH (w/o Front Seat Side Airbag)


    1. Attach the guide to install the reclining adjuster inside cover RH.

    2. Install the screw.

  5. INSTALL RECLINING ADJUSTER INSIDE COVER RH


    1. Attach the claw to install the reclining adjuster inside cover RH.

    2. Install the screw.

  6. INSTALL NO. 1 SEATBACK CLOTH


    1. A01DVAD

      Install the No. 1 seatback cloth.

  7. INSTALL SEPARATE TYPE FRONT SEATBACK PAD


    1. A01DX37

      Install the separate type front seatback pad to the separate type front seatback spring assembly.

  8. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. Using hog ring pliers, attach the strap of the separate type front seatback cover to the separate type front seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      A01DXEVE01
      Text in Illustration
      *A w/o Front Seat Side Airbag *B w/ Front Seat Side Airbag
      *1 Hog Ring Pliers - -
      *a Front view of front seatback *b Rear view of front seatback

    2. Attach the 4 claws to install the 2 front seat headrest supports.

    3. A01E2GQ

      w/ Front Seat Side Airbag:

      Attach the separate type front seatback cover bracket and install the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note

      After the separate type front seatback cover is installed, make sure the separate type front seatback cover bracket is not twisted.

    4. A01DZSS

      Pass the straps of the separate type front seatback cover through the holes of the separate type front seatback pad.

    5. A01DZWBE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, attach the strap of the separate type front seatback cover together with the No. 1 seatback cloth to the separate type front seatback spring assembly with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    6. A01E326

      for LHD, w/ Seat Heater System:

      Pass the front seatback heater assembly LH wire harness through the hole of the separate type front seatback cover.

    7. A01DZOVE01

      Pass the No. 1 seat wire through the hole of the separate type front seatback cover.

    8. Using hog ring pliers, attach the wires at the bottom of the separate type front seatback cover with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      Text in Illustration
      *1 Hog Ring Pliers
    9. A01DWRF

      w/o Front Seat Side Airbag:

      Connect the No. 1 seat wire connector and attach the wire harness clamp.

  9. INSTALL RECLINING ADJUSTER INSIDE COVER LH (w/ Front Seat Side Airbag)


    1. Attach the guide to install the reclining adjuster inside cover LH.

  10. INSTALL RECLINING ADJUSTER INSIDE COVER RH (w/ Front Seat Side Airbag)


    1. Attach the guide to install the reclining adjuster inside cover RH.

  11. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/ Front Seat Side Airbag)


    1. Install the separate type front seatback assembly with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Install the 2 screws.

    3. A01DZUF

      for LHD, w/ Seat Heater System:

      Attach the front seatback heater assembly LH wire harness clamp.

    4. A01DWRF

      Connect the No. 1 seat wire connector and attach the wire harness clamp.

    5. A01DYG3

      Attach the 4 front seat airbag wire harness clamps.

  12. INSTALL FRONT SEAT INNER CUSHION SHIELD RH


    1. Pass the wire harness of the front seat inner belt assembly below the claw and into the front seat inner cushion shield RH.

      A01DW91
    2. A01E2MZ

      Attach the claw to temporarily install the front seat inner cushion shield RH.

      Note

      Make sure that the wire harness of the front seat inner belt assembly is not being pinched inside the front seat inner cushion shield.

    3. A01DW0F

      Attach the guide and claw.

      Note

      Make sure that the wire harness of the front seat inner belt assembly is not being pinched inside the front seat inner cushion shield.

    4. Install the screw.

  13. INSTALL FRONT SEAT CUSHION SHIELD RH


    1. Attach the claw and guide to install the front seat cushion shield RH.

    2. Install the 3 screws.

    3. Install the 2 screws.

  14. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01DZFP

      Attach the 4 claws to install the slide and vertical power seat switch knob.

  15. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A01E176

      Attach the 2 claws to install the reclining power seat switch knob.

  16. INSTALL FRONT SEAT ASSEMBLY

    Click here

  17. INSPECT FRONT SEAT ASSEMBLY

    Click here