INTERCOOLER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01E1YJ

      Remove the 3 bolts, 2 nut and engine cover.

  3. REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. A01DXTE

      Disconnect the IAT sensor connector.

    2. Using a 22 mm deep socket wrench, remove the IAT sensor.

      Tech Tips

      Replace the IAT sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the IAT sensor each time the intercooler is replaced.

  4. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A01E2ZO

      Detach the 2 clamps and disconnect the sensor connector.

    2. Remove the 2 bolts and sensor.

  5. REMOVE INTERCOOLER ASSEMBLY


    1. A01DXPG

      Loosen the 2 hose clamps of the No. 1 air hose.

    2. A01DV5L

      Loosen the 2 hose clamps of the No. 2 air hose.

    3. A01DZT1

      Remove the 4 bolts and intercooler.

    4. A01E10P

      Remove the 4 bolts, intake air connector and gasket.