WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) DATA LIST / ACTIVE TEST
READ DATA LIST
Tip:Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note:In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the intelligent tester, read the Data List.
Table 1. Main Body Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D Door Courtesy SW
Front door courtesy light switch LH signal*1 / ON or OFF
Front door courtesy light switch RH signal*2 / ON or OFF
ON: Driver side door open
OFF: Driver side door closed
-
D-Door Lock Pos switch
Front door LH lock position switch signal*1 / ON or OFF
Front door RH lock position switch signal*2 / ON or OFF
ON: Driver side door unlocked
OFF: Driver side door locked
-
P Door Courtesy SW
Front door courtesy light switch RH signal*1 / ON or OFF
Front door courtesy light switch LH signal*2 / ON or OFF
ON: Front passenger side door open
OFF: Front passenger side door closed
-
P-Door Lock Pos switch
Front door RH lock position switch signal*1 / ON or OFF
Front door LH lock position switch signal*2 / ON or OFF
ON: Front passenger side door unlocked
OFF: Front passenger side door locked
-
RL Door Courtesy SW
Rear door courtesy light switch LH signal / ON or OFF
ON: Rear LH side door open
OFF: Rear LH side door closed
-
RL-Door Lock Pos switch
Rear door LH (door lock position switch) signal / ON or OFF
ON: Rear LH side door unlocked
OFF: Rear LH side door locked
-
RR Door Courtesy SW
Rear door courtesy light switch RH signal / ON or OFF
ON: Rear RH side door open
OFF: Rear RH side door closed
-
RR-Door Lock Pos switch
Rear door RH (door lock position switch) signal / ON or OFF
ON: Rear RH side door unlocked
OFF: Rear RH side door locked
-
Back Door Courtesy SW
Back door courtesy light switch signal / ON or OFF
ON: Back door open
OFF: Back door closed
-
Back Door Open
Back door lock position status / Permit or Prohibit
Permit: Back door unlocked
Prohibit: Back door locked
-
*1: for LHD
*2: for RHD
ACTIVE TEST
Tip:Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Active Test.
According to the display on the intelligent tester, perform the Active Test.
Table 2. Main Body Tester Display
Test Part
Control Range
Diagnostic Note
Hazard
Turn signal flasher relay
ON/OFF
-
Wireless Buzzer
Wireless door lock buzzer
ON/OFF
-
Door Lock
Door lock motor
LOCK/UNLOCK
-