DRIVE BELT INSTALLATION

PROCEDURE

  1. INSTALL V-RIBBED BELT

    1. Set the V-ribbed belt onto every pulley.

    2. A286180E01

      Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration, and while rotating the V-ribbed belt tensioner assembly clockwise, remove the 5 mm hexagon wrench.

      Note:

      Check that the V-ribbed belt is properly set to each pulley.

  2. INSPECT V-RIBBED BELT

    Click here

  3. INSTALL REAR ENGINE UNDER COVER RH

    1. A207250

      Install the under cover RH with the 5 clips.

  4. INSTALL RADIATOR SUPPORT OPENING COVER

    1. A290826

      Attach the 4 hooks to install the radiator support opening cover.

    2. Install the 3 clips.

  5. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here