BRAKE BOOSTER(for RHD) REASSEMBLY

PROCEDURE

  1. INSTALL VACUUM SENSOR ASSEMBLY (for 1KR-FE with Stop and Start System, 1PP)

    1. Install a new check valve grommet to the brake booster assembly.

    2. C302796C01

      *a

      35.7° +/- 4°
      V100136

      Up

      Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.

      Note:

      • Push the area (A) when installing the vacuum sensor assembly.

      • Do not push the area (B) when installing the vacuum sensor assembly.

  2. INSTALL CHECK VALVE GROMMET

    1. Install a new check valve grommet to the brake booster assembly.