DYNAMIC RADAR CRUISE CONTROL SYSTEM Cruise Main Indicator Light Circuit
| DTC Code | DTC Name |
|---|---|
| Cruise Main Indicator Light Circuit |
DESCRIPTION
The ECM turns on the cruise control indicator by sending indicator output demand signals to the combination meter assembly using CAN communication.
The cruise control indicator illuminates when the dynamic radar cruise control system has been turned on using the ON/OFF. If a malfunction is detected, the cruise control indicator goes out and a warning message is displayed.
The cruise control indicator circuit uses CAN communication. If the cruise control indicator is not functioning correctly, check for CAN communication system before troubleshooting this circuit.
CAUTION / NOTICE / HINT
When replacing the combination meter assembly, make sure to replace it with a new one.
PROCEDURE
PERFORM ACTIVE TEST USING GTS (METER DISPLAY 1)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter / Active Test.
Perform the Active Test according to the display on the GTS.
Body Electrical > Combination Meter > Active Test
Tester Display
Measurement Item
Control Range
Diagnostic Note
Meter Display 1
Multi-information display
OFF or All
-
Body Electrical > Combination Meter > Active Test
Tester Display
Meter Display 1
OK
The multi-information display turns on or off according to the operation of the Active Test.
Result
Proceed to
OK
NG
READ VALUE USING GTS (CRUISE INDICATOR)
Enter the following menus: Powertrain / Radar Cruise1 / Data List.
Read the Data List according to the display on the GTS.
for 2AD-FHV, 2AD-FTV:
Powertrain > Radar Cruise1
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
CCS Indicator M-CPU
Cruise control indicator status
ON or OFF
ON: Cruise control indicator illuminates
OFF: Cruise control indicator turns off
-
Powertrain > Radar Cruise1 > Data List
Tester Display
CCS Indicator M-CPU
for 2AR-FE, 3ZR-FE, 3ZR-FAE:
Powertrain > Radar Cruise1 > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
Cruise Indicator
Cruise control indicator status
ON or OFF
ON: Cruise control indicator illuminates
OFF: Cruise control indicator turns off
-
Powertrain > Radar Cruise1 > Data List
Tester Display
Cruise Indicator
for 2WW:
Powertrain > Cruise Control > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
CCS Indicator M-CPU
Cruise control indicator status
ON or OFF
ON: Cruise control indicator illuminates
OFF: Cruise control indicator turns off
-
Powertrain > Cruise Control > Data List
Tester Display
CCS Indicator M-CPU
Result
Result
Proceed to
The cruise control indicator illuminates and turns off according to the operation of the cruise control switch (ON/OFF).
A
The cruise control indicator does not illuminate but the Data List item Cruise Indicator changes according to the operation of the cruise control switch (ON/OFF).
B
The cruise control indicator does not illuminate and the Data List item Cruise Indicator does not change according to the operation of the cruise control switch (ON/OFF).
C
C REPLACE ECM
for 2AD-FHV:Click here
for 2AD-FTV:Click here
for 2AR-FE:Click here
for 3ZR-FAE:Click here
for 3ZR-FE:Click here
for 2WW:Click here