TRANSMISSION REVOLUTION SENSOR REMOVAL

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick here

  2. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click hereClick hereClick here

  3. REMOVE BATTERY

    Click hereClick hereClick here

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click hereClick hereClick here

  6. REMOVE TRANSMISSION REVOLUTION SENSOR

    1. C203168

      Disconnect the wire harness clamp.

    2. Disconnect the transmission revolution sensor connector.

    3. C203169

      Remove the bolt and transmission revolution sensor.

    4. Remove the O-ring from the transmission revolution sensor.