PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:U0073, U0265, U1110

DTC Code DTC Name
U0073 Control Module Communication Bus Off
U0265 Lost Communication with Image Processing Sensor A
U1110 Lost Communication with Clearance Warning ECU

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the television camera controller.

Tech Tips

If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U0073 Control Module Communication Bus Off Control module communication bus off CAN communication system Television camera controller
U0265 Lost Communication with Image Processing Sensor A Lost Communication with rear television camera assembly CAN communication system Television camera controller
U1110 Lost Communication with Clearance Warning ECU Lost communication with clearance warning ECU assembly CAN communication system Television camera controller

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.


      Chassis > Panoramic View Monitor > Clear DTCs

    2. Check for DTCs.


      Chassis > Panoramic View Monitor > Trouble Codes
      Result
      Result Proceed to
      DTCs are output A
      No DTCs are output B

      Tech Tips


      • If CAN communication system DTCs are stored, they may also be stored in other systems.

      • If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

      • If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even if the DTC was not output when rechecking for DTCs.

        Click here


    A

    GO TO CAN COMMUNICATION SYSTEM Click here

    B

    USE SIMULATION METHOD TO CHECK Click here