ULTRASONIC SENSOR(for Sedan Rear Side) REMOVAL

PROCEDURE

  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE REAR CENTER ULTRASONIC SENSOR

    Tip:

    Use the same procedure for all rear center ultrasonic sensors.

    1. E345847

      Disengage the clamp.

    2. Disconnect the connector.

    3. E345850

      Disengage the 2 claws to remove the rear center ultrasonic sensor.

  3. REMOVE ULTRASONIC SENSOR CLIP

    Tip:

    Use the same procedure for all ultrasonic sensor clips.

    1. E345851

      Disengage the 2 claws to remove the ultrasonic sensor clip.

  4. REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER

    Tip:

    Use the same procedure for all rear center ultrasonic sensor retainers.

    1. E345853

      Remove the rear center ultrasonic sensor retainer from the rear bumper assembly.

    2. Remove the old double-sided tape from the rear bumper assembly.

  5. REMOVE REAR CORNER ULTRASONIC SENSOR

    Tip:

    Use the same procedure for all rear corner ultrasonic sensors.

    1. E345846

      Disengage the clamp.

    2. Disconnect the connector.

    3. E345848

      Disengage the 2 claws to remove the rear corner ultrasonic sensor.

  6. REMOVE ULTRASONIC SENSOR CLIP

    Tip:

    Use the same procedure for all ultrasonic sensor clips.

    1. E345849

      Disengage the 2 claws to remove the ultrasonic sensor clip.

  7. REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER

    Tip:

    Use the same procedure for all rear corner ultrasonic sensor retainers.

    1. E345852

      Remove the rear corner ultrasonic sensor retainer from the rear bumper assembly.

    2. Remove the old double-sided tape from the rear bumper assembly.