UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Measure points with the engine under cover No. 1, engine under cover No. 2 and front floor cover removed.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Cross Inner Member Standard Hole φ13 (0.51)
B, b Front Suspension Crossmember Installation Bolt M16 (0.63)
C, c Front Suspension Crossmember Installation Bolt M16 (0.63)
D, d Front Side Inner Rear Member Standard Hole φ18 (0.71)
B002404C01
*a

mm

(in.)

 - -