ROCKER OUTER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A01GHI9

  1. REMOVAL

    Symbol Meaning
    B002F5A Remove Weld Points
    A01GH60 Cut and Join Location
    A01GH9I Cut Location for Supply Parts
    A01GHCOC01
    *a 360 mm (14.17 in.) - -
    A01GHFZ Laser Screw Welding - -
    A01GHIA
    A01GHF9

  2. INSTALLATION

    Symbol Meaning
    B002F3I Plug Weld
    A01GH73 Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A01GH5IC01
      *1 ROCKER PANEL OUTER - -
      A01GHFZ Laser Screw Welding - -
      A01GHA3

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.