REAR SEAT ASSEMBLY(for Wagon) REASSEMBLY

PROCEDURE


  1. INSTALL REAR SEATBACK SIDE PAD LH

    A004OMR

    1. Install the side pad.

  2. INSTALL REAR SEATBACK SIDE PAD RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH

    A004RLW

    1. Attach the 3 clamps and 3 claws to install the cover.

  4. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

    A004RJE

    1. Install the belt guide with the 2 screws.

  6. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY LH

    A004TN9

    1. Install the seatback lock with the 2 bolts.

      Torque:
      22 N*m  { 224 kgf*cm, 16 ft.*lbf }

  8. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY RH

    A004RSJ

    1. Install the seatback lock with the 2 bolts.

      Torque:
      22 N*m  { 224 kgf*cm, 16 ft.*lbf }

  9. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY

    A004TZL

    1. Pass the rear center seat outer belt floor anchor through the seatback frame.

    2. Align the 2 claws with the seat belt positioning holes and install the retractor of the seat belt as shown in the illustration.

    3. Install the seat belt with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  10. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH

    A004RZD

    1. Attach the 9 clamps to install the seatback cover to the seatback pad.

  11. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH

    A004Q0Q

    1. Attach the 9 clamps to install the seatback cover to the seatback pad.

  12. INSTALL SEATBACK COVER WITH PAD


    1. Install the 2 seatback covers with pads to the 2 seatback frames.

  13. INSTALL REAR SEAT HEADREST SUPPORT

    A004TSS

    1. for LH Side:

      Attach the 4 claws to install the 2 headrest supports.

    2. A004OXC

      for RH Side:

      Attach the 8 claws to install the 4 headrest supports.

  14. INSTALL REAR SEATBACK LOCK COVER LH

    A004STU

    1. Install the lock cover with the 2 screws.

  15. INSTALL REAR SEATBACK LOCK COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  16. INSTALL REAR SEAT SHOULDER BELT HOLE COVER

    A004NGK

    1. Attach the 4 claws to install the belt hole cover.

  17. INSTALL SEAT BELT ANCHOR COVER CAP

    A004QF5

    1. Attach the 2 claws to install the anchor cover cap.

  18. INSTALL REAR SEAT LOCK CONTROL LEVER LH

    A004ODE

    1. Attach the 4 claws to install the control lever.

  19. INSTALL REAR SEAT LOCK CONTROL LEVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  20. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

  21. INSTALL REAR SEAT HEADREST ASSEMBLY

  22. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH

    A004PEO

    1. Attach the clamps to install the carpet.

  23. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH

    A004RWA

    1. Attach the clamps to install the carpet.

  24. INSTALL REAR SEATBACK COVER

    A004RKY

    1. Attach the 4 claws to install the seatback cover.

      Tech Tips

      Use the same procedure to install the cover on the other side.

  25. INSTALL REAR CENTER SEAT ARMREST DOOR SUB-ASSEMBLY (w/ Center Armrest Box)

    A004MSE

    1. Install the armrest door.

  26. INSTALL REAR SEAT ARMREST HANDLE (w/ Center Armrest Box)

    A004N8W

    1. Attach the 4 claws to install the armrest handle.

  27. INSTALL CENTER ARMREST HINGE COVER RH (w/o Center Armrest Box)

    A004U6L

    1. Install the hinge cover.

  28. INSTALL REAR SEAT CENTER ARMREST BOX (w/ Center Armrest Box)

    A004TBZ

    1. Install the armrest box.

  29. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY

    A004S7O

    1. Install the bush.

    2. A004NW1E02
      Text in Illustration
      *1 Pin

      Insert the pin of the rear center seat armrest into the bush.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    3. Install the washer and center seat armrest with the bolt.

  30. INSTALL NO. 1 REAR CENTER SEAT ARMREST BOX (w/ Center Armrest Box)

    A004ND6

    1. Attach the 3 claws to install the armrest box.

  31. INSTALL NO. 1 SEAT ARMREST CAP

    A004NQN

    1. Attach the 3 claws to install the armrest cap.

  32. INSTALL CHILD RESTRAINT SEAT GUIDE CUP

    A004P2M

    1. Attach the 8 clamps to install the 4 guide cups to the seat cushion frame.

  33. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    A004MQS

    1. Attach the clamps to install the seat cushion cover to the seat cushion pad.

  34. INSTALL SEAT CUSHION COVER WITH PAD

    A004OED

    1. Install the cushion cover with pad to the cushion frame as shown in the illustration.

    2. Attach the clamps.

    3. Attach the claws.