VANE PUMP (for KD Series Engine) REMOVAL

Note


  • When using a vise, do not overtighten it.

  • When installing the parts indicated by arrows, coat them with power steering fluid Click here.


  1. REMOVE NO. 2 ENGINE UNDER COVER (for 4WD)


    1. Remove the 4 bolts and under cover.

  2. REMOVE NO. 1 ENGINE UNDER COVER (for 4WD)


    1. Remove the 4 bolts and under cover.

  3. REMOVE FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE


    1. Remove the 8 bolts and crossmember brace.

  4. DRAIN POWER STEERING FLUID

  5. DISCONNECT OIL RESERVOIR TO PUMP HOSE


    1. A01E1J9E01

      Remove the clamp and disconnect the hose.

  6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY


    1. A01E34G

      Using a union nut wrench, remove the union bolt and disconnect the pressure feed tube from the vane pump.

    2. Remove the gasket from the pressure feed tube.

  7. REMOVE VANE PUMP ASSEMBLY


    1. A01E34AE01

      Remove the 2 nuts and vane pump.

    2. Remove the O-ring.