VSC OFF SWITCH(for Hatchback, Wagon) INSPECTION

PROCEDURE

  1. INSPECT COMBINATION SWITCH ASSEMBLY

    1. C264692C08

      *a

      Component without harness connected

      (VSC OFF Switch (Combination Switch Assembly))

      Make sure that there is no looseness in the locking part and the connecting part of the connector.

    2. Disconnect the VSC OFF switch (combination switch assembly) connector.

    3. Check both the connector case and the terminal for deformation and corrosion.

      OK

      No deformation or corrosion.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      2 (+) - 3 (E)

      Switch pushed in

      Below 1 Ω

      2 (+) - 3 (E)

      Switch not pushed in

      10 kΩ or higher

      If the result is not as specified, replace the VSC OFF switch (combination switch assembly).