LIGHTING SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tip:

    The following items can be customized.

    1. Customizing with the GTS.

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / (desired system).

      5. Select the setting by referring to the table below.

        Warning

        Tester Display

        Description

        Default

        Setting

        ECU

        Lane Change Flashing Times Setting

        Lane change flasher system*1

        OFF

        00:OFF,01:3,10:5,11:7

        Combination meter assembly

        Lane Change Flashing Times Setting

        Lane change flasher system*2

        3

        000:OFF,001:3,010:4,011:5,100:6,101:7

        Combination meter assembly

        *1: for Segment Display Type

        *2: for TFT Display Type

        Light Control

        Tester Display

        Description

        Default

        Setting

        ECU

        Response Time

        Changes the delay timing of lighting the taillights when going into a tunnel when the headlight dimmer switch is in the AUTO position.*1

        Normal

        0:Normal,1:Long

        Main body ECU (Multiplex network body ECU)

        Disp Ex ON Sen

        Changes the level of ambient light at which the system dims lights such as the indicator lights of the combination meter, the A/C indicator light and the clock.*1, *4

        Normal

        000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2

        Main body ECU (Multiplex network body ECU)

        Disp Ex OFF Sen

        Changes the level of ambient light at which the system cancels the dimming of lights such as the indicator lights of the combination meter, the A/C indicator light and the clock.*1, *5

        Normal

        000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2

        Main body ECU (Multiplex network body ECU)

        Light Auto OFF Delay

        Function to continue illuminating the headlights and taillights for a certain period of time after the ignition switch is turned from ON to off with the headlight dimmer switch in the AUTO position and the headlights and taillights on.*3

        30 s

        00:OFF,01:30 s,10:60 s,11:90 s

        Main body ECU (Multiplex network body ECU)

        Sensitivity

        Adjusts the ambient light sensitivity of the automatic light control system.*1, *6

        Normal

        000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2

        Main body ECU (Multiplex network body ECU)

        Follow Me Home Lighting Time

        Changes the low beam headlight lighting time when ignition switch is off and headlight dimmer switch is pulled to flash headlights once.*2

        30 s

        00:30 s,01:60 s,10:90 s,11:120 s

        Main body ECU (Multiplex network body ECU)

        *1: w/ Automatic Light Control System

        *2: w/ Follow Me Home System

        *3: Vehicle displaying the Item "Light Auto OFF Delay" on the GTS.

        Tip:

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *4

        E251735E04
        Tip:

        When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

        *5

        E251735E04
        Tip:

        When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

        *6

        E251735E06
        Tip:

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

    2. Customizing with Multi-display.

      1. Turn the ignition switch to ON.

      2. Enter the following menus: Setup / Vehicle / Vehicle Settings.

      3. Select the setting by referring to the table below.

        Table 1. Warning

        Display

        Default

        Content

        Setting

        Relevant ECU

        Light Sensor Sensitivity

        0 (middle bar)

        Adjusts the ambient light sensitivity of the automatic light control system.*1, *2

        -2, -1, 0, +1 or +2

        Main body ECU (Multiplex network body ECU)

        *1: w/ Automatic Light Control System

        Tip:

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *2

        E251735E05
        Tip:

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.