BRAKE MASTER CYLINDER(for LHD) DISASSEMBLY

PROCEDURE

  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

    1. Mount the brake master cylinder sub-assembly in a vise.

      Note:

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. C273649

      Using an E7 "TORX" socket wrench, remove the "TORX" screw and brake master cylinder reservoir assembly from the brake master cylinder body.

      Note:

      Do not drop the brake master cylinder reservoir assembly.

    3. Remove the brake master cylinder body from the vise.

    4. C273650

      Disengage the claw to remove the wire harness clamp.

  2. REMOVE MASTER CYLINDER RESERVOIR GROMMET

    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.

  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER