REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL REAR LIGHT ASSEMBLY LH

    1. E332629C01
      V100155

      Protective Tape

      Set the rear light assembly LH in place.

    2. Install the 5 nuts.

    3. Connect the connector.

  2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  4. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  6. INSTALL CENTER BACK DOOR GARNISH

    Click here