THERMOSTAT REMOVAL

Tech Tips

If the thermostat was not installed, cooling efficiency would be harmed. Even if the engine tends to overheat, do not remove the thermostat.


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. Remove the 4 bolts and under cover.

  2. DRAIN ENGINE COOLANT


    1. Remove the radiator cap.

    2. Loosen the cylinder block drain cock plug and radiator drain plug, and then the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

      A01DX7ME01

  3. REMOVE V-BANK COVER


    1. A01E0A6

      Remove the 2 nuts and the V-bank cover.

  4. DISCONNECT RADIATOR HOSE OUTLET

  5. REMOVE WATER INLET HOUSING WITH THERMOSTAT


    1. A01E15J

      Remove the 3 nuts, water inlet with thermostat and gasket.