AIR CONDITIONING PRESSURE SENSOR INSTALLATION

PROCEDURE

  1. INSTALL AIR CONDITIONER PRESSURE SENSOR

    1. Remove the vinyl tape from the air conditioner tube and accessory assembly and the connecting part of the air conditioner pressure sensor.

    2. Apply sufficient compressor oil to the O-ring of a new air conditioner pressure sensor and the connecting surface.

      Refrigerant

      Compressor Oil

      HFC-134a (R134a)

      ND-OIL 8 or equivalent

      HFO-1234yf (R1234yf)

      ND-OIL 12 or equivalent
    3. E269731C01

      *a

      Turn

      *b

      Hold

      Using a 27 mm deep socket wrench, install the air conditioner pressure sensor.

      11 N*m

      112 kgf*cm

      8 ft.*lbf

    4. Connect the connector.

  2. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

    1. for HFC-134a (R134a):

      Click here

    2. for HFO-1234yf (R1234yf):

      Click here

  3. WARM UP ENGINE

    1. for HFC-134a (R134a):

      Click here

    2. for HFO-1234yf (R1234yf):

      Click here

  4. INSPECT FOR REFRIGERANT LEAK

    1. for HFC-134a (R134a):

      Click here

    2. for HFO-1234yf (R1234yf):

      Click here