CAN COMMUNICATION SYSTEM(for LHD) PARTS LOCATION
ILLUSTRATION
*A |
w/ Navigation System (for HDD) |
*B |
w/ Navigation System (for SD) |
*C |
w/ Audio and Visual System (for Radio and Display Type) |
*D |
for 4WD/AWD |
*E |
w/ Stop and Start System |
*F |
w/ Vehicle Stability Control System |
*G |
w/ Seat Memory |
- |
- |
*1 |
MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
*2 |
INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY |
*3 |
COMBINATION METER ASSEMBLY |
*4 |
POWER STEERING ECU ASSEMBLY |
*5 |
DLC3 |
*6 |
SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY (STEERING ANGLE SENSOR) |
*7 |
AIR CONDITIONING AMPLIFIER ASSEMBLY |
*8 |
NAVIGATION ECU SUB-ASSEMBLY |
*9 |
NAVIGATION RECEIVER ASSEMBLY |
*10 |
RADIO AND DISPLAY RECEIVER ASSEMBLY |
*11 |
4WD ECU ASSEMBLY |
*12 |
ENGINE STOP AND START ECU |
*13 |
AIRBAG SENSOR ASSEMBLY |
*14 |
POSITION CONTROL ECU AND SWITCH ASSEMBLY |
ILLUSTRATION
*A |
w/ Lane Departure Alert System |
*B |
w/ Entry and Start System |
*C |
w/ Power Back Door System |
*D |
w/ Blind Spot Monitor System |
*E |
for 2AD-FHV, 2AD-CCo and Automatic Transaxle |
*F |
for 3ZR-FAE |
*G |
for 3ZR-FAE, 1AD-FTV or w/ Occupant Classification System |
*H |
w/ Parking Assist Monitor System (for Camera built-in ECU) |
*1 |
ECM |
*2 |
BRAKE ACTUATOR ASSEMBLY (SKID CONTROL ECU) |
*3 |
LANE DEPARTURE WARNING CAMERA |
*4 |
CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
*5 |
MULTIPLEX NETWORK DOOR ECU |
*6 |
BLIND SPOT MONITOR SENSOR LH |
*7 |
BLIND SPOT MONITOR SENSOR RH |
*8 |
TRANSMISSION CONTROL ECU ASSEMBLY |
*9 |
CONTINUOUSLY VARIABLE LIFT CONTROLLER ASSEMBLY |
*10 |
BATTERY CURRENT SENSOR ASSEMBLY |
*11 |
TELEVISION CAMERA ASSEMBLY |
- |
- |
*a |
Refer to Service Bulletin for installation position. |
- |
- |
ILLUSTRATION
*A |
for Power Seat |
*B |
w/ Power Back Door System |
*1 |
No. 1 CAN Junction Connector |
*2 |
No. 2 CAN Junction Connector |
*3 |
No. 3 CAN Junction Connector |
*4 |
No. 4 CAN Junction Connector |
*5 |
No. 5 CAN Junction Connector |
*6 |
No. 1 CAN Junction Terminal |